Project summary
The homeowner in Brushy Creek wanted to turn a rough, unfinished-looking garage into a clean and more welcoming space. The scope included both the walls and ceiling, not just isolated patches.
The starting condition
The garage was in very poor condition for a finished space. Parts of the drywall joint tape had peeled away, and the walls contained many holes, screw holes, dents, and other surface imperfections. The ceiling also needed the seams and repaired areas brought to a consistent finish.
Painting over those defects would have left the damage visible. The surface needed a complete preparation process so the final paint would look even in the bright, open garage.
How we repaired and leveled the garage walls
- Full floor protection: the concrete floor was covered before sanding, compound, and paint work began.
- Tape and drywall repair: loose tape and damaged areas were repaired, new tape was installed where needed, and holes and screw holes were filled.
- Level 4 finish: joint compound was applied and feathered across seams and repaired areas to create a consistent surface on the walls and ceiling.
- Sanding and inspection: the repaired surfaces were sanded and checked so ridges, edges, and visible imperfections could be corrected before coating.
- Primer: primer helped seal the prepared drywall and create a more uniform base for paint.
- Two paint coats: the walls and ceiling received two finish coats for even coverage and a refreshed appearance.
The finished result
Once the repairs, Level 4 finish, primer, and two coats of paint were complete, the walls and ceiling looked new again. The garage felt noticeably cleaner, brighter, and more comfortable, with the old holes and damaged tape no longer distracting from the space.
This project is a good example of why garage painting often starts with drywall preparation. A smooth result depends on repairing the surface first, not simply applying more paint over existing problems.
Cost and timeline
The work took three days and cost $4,500 including materials. That price was specific to this Brushy Creek garage and this complete scope: walls and ceiling, floor protection, tape replacement, drywall repairs, hole filling, Level 4 finishing, sanding, primer, and two paint coats. Every garage is different, so a site visit or clear photos are needed for an accurate estimate.
Request a garage drywall repair estimate in Brushy Creek
If your garage walls have peeling tape, screw holes, dents, rough seams, or old patches, VAM Services LLC can review the condition and recommend the right level of repair before painting.
Explore drywall repair services or request a free estimate for your Austin-area home.
Frequently asked questions
- How much did this Brushy Creek garage wall project cost?
- This specific project cost $4,500 including materials. The price covered the garage walls and ceiling, floor protection, drywall and tape repairs, Level 4 finishing, sanding, primer, and two paint coats.
- How long did the garage drywall repair take?
- The complete wall and ceiling project took three days. Actual timing depends on the condition of the drywall, drying time between coats, access, and the size of the garage.
- What does a Level 4 drywall finish mean?
- Level 4 is a smooth drywall finish prepared with joint compound over seams, fasteners, and repaired areas, followed by careful sanding and primer. It creates a clean surface for paint when a more finished look is wanted.
- Can you repair screw holes and peeling drywall tape before painting?
- Yes. The damaged tape and loose material should be removed or secured, new tape installed where needed, and screw holes and other imperfections filled before the surface is leveled, primed, and painted.
Project scope note
Project details, photos, timeline, and price in this case study come from the VAM Services LLC project record and owner’s firsthand account. The price is specific to this project and is not a fixed price for every garage.